Children’s amusement equipment must be well maintained to effectively extend the service life
The plastic part and glass fiber can be diluted and soaked with soapy water, disinfectant washing powder, bleaching powder, etc., then scrub with a soft cloth or soft brush, then rinse with clean water, dry or dry with a clean cloth, spray 84 disinfectant.
The soft sponge part can be scrubbed with a soft cloth dipped in soapy water, or placed in the sun for disinfection. Moisture-resistant, heat-resistant, non-fading wooden parts can be soaked in soapy water and dried, and then sprayed with 84 disinfectant for disinfection.
If you need to remove the rust on the metal part, you can use a brush to remove the floating rust and clean it with a dry cloth; after exposure to the sun, you can use the colorless Sanhe brand self-spraying paint at a distance of about 20 cm. Once, play a protective role, wash, dry and disinfect after the paint is completely dry. When cleaning the electrical parts of the naughty castle circuit, you must first ensure that the power is off, and it is forbidden to irrigate. Generally, scrub with a damp cloth, and then connect it to the power supply after it is dry.
All amusement equipment, outdoor slides and drill barrels should not have water accumulation after rain, if there is, a hole with a diameter of 4 mm should be drilled in the lower part to drain. If it is an indoor activity room, ground, wall, etc., it should be disinfected by ultraviolet radiation every day, and the room should be ventilated regularly, and sprayed with hydrogen peroxide once a week for disinfection.
At the time of disinfection, be sure to check whether the connection part is firm, the metal is frequently moved, the connection part is lubricated, and the circuit appliances and ordinary parts are not damaged.